Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 171)

File Management Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 7.25
erase startup-config
This command deletes the file that is set as the startup-config file, which is the
configuration file that the system runs when it boots up.
At the next restart, the device loads the default configuration file, default.cfg. If default.cfg
no longer exists, then the device loads with the factory default configuration. This
provides a mechanism for you to return the device to the factory default settings.
Syntax erase startup-config
Mode Privileged Exec
Example To delete the file currently set as the startup-config, use the command:
Related Commands boot config-file backup
copy running-config
copy startup-config
show boot
mkdir
This command makes a new directory.
Syntax mkdir <url>
Mode Privileged Exec
Usage The keywords flash, nvs, usb, tftp, scp, sftp and http are reserved for tab completion
when using the copy, move, delete, cd and dir command. Keywords flash, nvs, usb, tftp,
scp, sftp and http cannot be applied as directory or subdirectory names when using a
mkdir command.
Example To make a new directory called images in the current directory, use the command:
Related Commands cd
dir
pwd
awplus# erase startup-config
Parameter Description
URL of the directory that you are creating.
awplus# mkdir images