Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 581)

Link Aggregation Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 21.15
show port etherchannel
Use this command to show LACP details of the switch port specified.
For information on output options, see “Controlling “show” Command Output” on
page 1.37 .
Syntax show port etherchannel <port>
Mode User Exec and Privileged Exec
Example
Output Figure 21-9: Example output from the show port etherchannel command
Parameter Description
Name of the switch port to display LACP information about.
awplus# show port etherchannel port1.0.1
% Link: port1.0.1 (5001)
% Aggregator: po1 (4501)
% Receive machine state: Current
% Periodic Transmission machine state: Fast periodic
% Mux machine state: Collecting/Distributing
% Actor Information: Partner Information:
% Selected ................ Selected Partner Sys Priority ............ 0
% Physical Admin Key ............. 1 Partner System .. 00-00-00-00-00-00
% Port Key ....................... 5 Port Key ........................ 0
% Port Priority .............. 32768 Port Priority ................... 0
% Port Number ..,,,,,.......... 5001 Port Number ..................... 0
% Mode ...................... Active Mode ...................... Passive
% Timeout ..................... Long Timeout ..................... Short
% Individual ................... Yes Individual .................... Yes
% Synchronised ................. Yes Synchronised .................. Yes
% Collecting ................... Yes Collecting .................... Yes
% Distributing ................. Yes Distributing .................. Yes
% Defaulted .................... Yes Defaulted ..................... Yes
% Expired ........................ No Expired ........................ No