Auth-web-server ssl – Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 1184
Authentication Commands
Software Reference for x310 Series Switches
43.58
AlliedWare Plus
TM
Operating System - Version 5.4.4C
C613-50046-01 REV A
auth-web-server ssl
This command enables HTTPS functionality for the web authentication server feature.
Use the no variant of this command to disable HTTPS functionality for the web
authentication server.
Syntax
auth-web-server ssl
no auth-web-server ssl
Default
HTTPS functionality for the web authentication server feature is disabled by default.
Mode
Global Configuration
Examples
To enable HTTPS functionality for the web authentication server feature, use the following
commands:
To disable HTTPS functionality for the web authentication server feature, use the following
commands:
Validation
Commands
show auth-web-server
show running-config
awplus#
configure terminal
awplus(config)#
auth-web-server ssl
awplus#
configure terminal
awplus(config)#
no auth-web-server ssl