Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 296)

Logging Commands
Software Reference for x310 Series Switches
10.24 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
Mode Global Configuration
Examples To create a filter to send all messages generated by EPSR that have a severity of notices
or higher to a remote syslog server with IP address 10.32.16.21 use the following
commands:
<program-
name>
(cont.) lacp Link Aggregation Control Protocol (LACP)
stp Spanning Tree Protocol (STP)
rstp Rapid Spanning Tree Protocol (RSTP)
mstp Multiple Spanning Tree Protocol (MSTP)
imi Integrated Management Interface (IMI)
imish Integrated Management Interface Shell (IMISH)
epsr Ethernet Protection Switched Rings (EPSR)
irdp ICMP Router Discovery Protocol (IRDP)
rmon Remote Monitoring
loopprot Loop Protection
poe Power-inline (Power over Ethernet)
dhcpsn DHCP snooping (DHCPSN)
facility Filter messages to the log by syslog facility.
<facility> Specify one of the following syslog facilities to include messages from
in the log:
kern Kernel messages
user Random user-level messages
mail Mail system
daemon System daemons
auth Security/authorization messages
syslog Messages generated internally by syslogd
lpr Line printer subsystem
news Network news subsystem
uucp UUCP subsystem
cron Clock daemon
authpriv Security/authorization messages (private)
ftp FTP daemon
msgtext Select messages containing a certain text string
<text-
string> A text string to match. This is case sensitive, and must be the last text
on the command line.
Parameter Description
awplus# configure terminal
awplus(config)# log host 10.32.16.21 level notices program epsr