Access-list (hardware ip numbered), Access-list (hardware, Ip numbered) – Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 852

IPv4 Hardware Access Control List (ACL) Commands
Software Reference for x310 Series Switches
34.6
AlliedWare Plus
TM
Operating System - Version 5.4.4C
C613-50046-01 REV A
access-list (hardware IP numbered)
This command creates an access-list for use with hardware classification, such as QoS. The
access-list will match on either TCP or UDP type packets that have the specified source and
destination IP addresses and Layer 4 port values or ranges. The parameter any may be
specified if an address does not matter and the port values are optional.
The no variant of this command removes the previously specified IP hardware access-list.
Syntax
[ip]
access-list <3000-3699>
{deny|permit|copy-to-cpu|copy-to-mirror|send-to-mirror|send-to-
cpu} ip <source> <destination>
Syntax
[icmp]
access-list <3000-3699>
{deny|permit|copy-to-cpu|copy-to-mirror|send-to-mirror|send-to-
cpu} icmp <source> <destination> [icmp-type <type-number>]
no access-list <3000-3699>
Table 34-2: Parameters in the access-list (hardware IP numbered) command - ip|icmp
Parameter
Description
<3000-3699>
Hardware IP access-list number.
deny
Access-list rejects packets that match the source and destination
filtering specified with this command.
permit
Access-list permits packets that match the source and
destination filtering specified with this command.
copy-to-cpu
Specify packets to copy to the CPU.
copy-to-mirror
Specify packets to copy to the mirror port.
send-to-mirror
Specify packets to send to the mirror port.
send-to-cpu
Specify packets to send to the CPU.
icmp
ICMP packet.
ip
IP packet.