Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual

Page 969

IPv6 Software Access Control List (ACL) Commands

Software Reference for x310 Series Switches

C613-50046-01 REV A

AlliedWare Plus

Operating System - Version 5.4.4C

37.17

For backwards compatibility you can either create IPv6 standard access-lists from within
this command, or you can enter ipv6 access-list standard followed by only the
IPv6 standard access-list name. This latter (and preferred) method moves you to the
(config-ipv6-std-acl)

prompt for the selected IPv6 standard access-list, and from

here you can configure the filters for this selected IPv6 standard access-list.

Example

To enter the IPv6 Standard ACL Configuration mode for the access-list named my-list,
use the commands:

Related Commands

(ipv6 access-list standard filter)
show ipv6 access-list (IPv6 Software ACLs)
show running-config

Note

Software ACLs will deny access unless explicitly permitted by an ACL action.

awplus#

configure terminal

awplus(config)#

ipv6 access-list standard my-list

awplus(config-ipv6-std-acl)#