Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1066)

802.1X Introduction and Configuration
Software Reference for x310 Series Switches
40.8 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
Names of Commands Used
dot1x port-control
radius-server host
radius-server key
Validation Commands
show dot1x
show dot1x interface
awplus(config-if)#
exit Exit the Interface Configuration mode and enter the
Global Configuration mode.
awplus(config)#
radius-server host 192.126.12.1
auth-port 1812
Specify the RADIUS Server address (192.126.12.1) and
authentication port.
awplus(config)#
radius-server key secret Specify the shared key secret between the RADIUS server
and the client.
awplus(config)#
interface vlan4 Specify the vlan (vlan4) to be configured and enter the
Interface mode.
awplus(config-if)#
ip address 192.126.12.2/24 Set the IP address on vlan4.
Table 40-1: 802.1X configuration on the switch