Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 1951
LLDP Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A
AlliedWare Plus
TM
Operating System - Version 5.4.4C
71.25
Default
By default no civic address location information is configured.
Mode
Civic Address Location Configuration
Usage
The country parameter must be configured before any other parameters can be
configured; this creates the location. The country parameter cannot be deleted. One or
more of the other parameters must be configured before the location can be assigned to a
port. The country parameter must be entered as an upper-case two-letter country code, as
specified in ISO 3166. All other parameters are entered as alpha-numeric strings. Do not
configure all the civic address parameters (this would generate TLVs that are too long).
Configure a subset of these parameters—enough to consistently and precisely identify
the location of the device. If the location is to be used for Emergency Call Service (ECS), the
particular ECS application may have guidelines for configuring the civic address location.
For more information about civic address format, see
Identification TLV” on page 70.7
.
To specify the civic address location, use the
location civic-location identifier
command.
To delete the civic address location, use the no variant of the location civic-location
identifier command. To assign the civic address location to particular ports, so that it can
be advertised in TLVs from those ports, use the command
command.
Examples
To configure civic address location 1 with location "27 Nazareth Avenue, Christchurch,
New Zealand" in civic-address format, use the commands:
Related Commands
location civic-location-id
location civic-location identifier
show lldp local-info
show location
awplus#
configure terminal
awplus(config)#
location civic-location identifier 1
awplus(config-civic)#
country NZ
awplus(config-civic)#
city Christchurch
awplus(config-civic)#
primary-road-name Nazareth
awplus(config-civic)#
street-suffix Avenue
awplus(config-civic)#
house-number 27