Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 129)

Creating and Managing Files
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 6.5
Changing directories
To change to another directory, enter Privileged Exec mode and enter the command:
To go to a directory one level higher in the directory tree, enter the command:
Example To change to a directory called “example”, enter the command:
To go up one level, which returns you to the top level directory, enter the command:
Changing to a directory in NVS memory or on a USB storage
device
To change to the top-level directory in the NVS memory filesystem, enter Privileged Exec
mode and enter the command:
To change to the top-level directory on a USB storage device, enter the command:
Next, you can change to other directories by entering the command:
Alternatively, you can go straight from Flash to a subdirectory in the alternative filesystem,
by entering one of the commands:
To return to the Flash filesystem, enter the command:
Example To change to the directory within NVS called “example”, enter the command:
awplus# cd <directory-name>
awplus# cd ..
awplus# cd example
awplus# cd ..
awplus# cd nvs:
awplus# cd usb:/
awplus# cd <directory-name>
awplus# cd nvs:<directory-name>
awplus# cd usb:/<directory-name>
awplus# cd flash:/
awplus# cd nvs:example