Service password-encryption – Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 111
User Access Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A
AlliedWare Plus
TM
Operating System - Version 5.4.4C
5.25
service password-encryption
Use this command to enable password encryption. This is enabled by default. When
password encryption is enabled, the device displays passwords in the running config in
encrypted form instead of in plain text.
Use the no service password-encryption command to stop the device from displaying
newly-entered passwords in encrypted form. This does not change the display of existing
passwords.
Syntax
service password-encryption
no service password-encryption
Mode
Global Configuration
Example
Validation
Commands
Related Commands
Note
Do not use encrypted passwords for GUI users. The GUI requires unencrypted
user passwords only - not encrypted user passwords. Do not use option 8 for
GUI users.
awplus#
configure terminal
awplus(config)#
service password-encryption