Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1975)

LLDP Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 71.49
show lldp statistics interface
This command displays the LLDP statistics (packet and event counters) for specified ports.
If no port list is supplied, LLDP statistics for all ports are displayed.
Syntax show lldp statistics interface [<port-list>]
Mode User Exec and Privileged Exec
Examples To display LLDP statistics information for all ports, use the command:
To display LLDP statistics information for ports 1.0.1 and 1.0.6, use the command:
Output
Parameter Description
<port-list> The ports for which the statistics are to be shown.
awplus# show lldp statistics interface
awplus# show lldp statistics interface port1.0.1,port1.0.6
Figure 71-8: Example output from the show lldp statistics interface command
awplus# show lldp statistics interface port1.0.1,port1.0.6
LLDP Packet and Event Counters:
port1.0.1
Frames: Out ................... 27
In .................... 22
In Errored ............ 0
In Dropped ............ 0
TLVs: Unrecognized .......... 0
Discarded ............. 0
Neighbors: New Entries ........... 3
Deleted Entries ....... 0
Dropped Entries ....... 0
Entry Age-outs ........ 0
port1.0.6
Frames: Out ................... 15
In .................... 18
In Errored ............ 0
In Dropped ............ 0
TLVs: Unrecognized .......... 0
Discarded ............. 0
Neighbors: New Entries ........... 1
Deleted Entries ....... 0
Dropped Entries ....... 0
Entry Age-outs ........ 0
Table 71-8: Parameters in the output of the show lldp statistics interface command
Parameter Description
Frames Out Number of LLDPDU frames transmitted.
Frames In Number of LLDPDU frames received.
Frames In Errored Number of invalid LLDPDU frames received.