Show ip igmp groups – Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 778
IGMP Snooping Commands
Software Reference for x310 Series Switches
31.40
AlliedWare Plus
TM
Operating System - Version 5.4.4C
C613-50046-01 REV A
show ip igmp groups
Use this command to display the multicast groups with receivers directly connected to the
router, and learned through IGMP.
For information on output options, see
“Controlling “show” Command Output” on
Syntax
show ip igmp groups [
Mode
User Exec and Privileged Exec
Example
The following command displays local-membership information for all ports in all
interfaces:
Output
Figure 31-2: Example output from the show ip igmp groups command
Table 31-1: Parameters in the output of the show ip igmp groups command
Parameter
Description
Address of the multicast group, entered in the form A.B.C.D.
Interface name for which to display local information.
awplus#
show ip igmp groups
IGMP Connected Group Membership
Group Address Interface Uptime Expires Last
Reporter
224.0.1.1 port1.0.1 00:00:09 00:04:17 10.10.0.82
224.0.1.24 port1.0.2 00:00:06 00:04:14 10.10.0.84
224.0.1.40 port1.0.3 00:00:09 00:04:15 10.10.0.91
224.0.1.60 port1.0.3 00:00:05 00:04:15 10.10.0.7
224.100.100.100 port1.0.1 00:00:11 00:04:13 10.10.0.91
228.5.16.8 port1.0.3 00:00:11 00:04:16 10.10.0.91
228.81.16.8 port1.0.7 00:00:05 00:04:15 10.10.0.91
228.249.13.8 port1.0.3 00:00:08 00:04:17 10.10.0.91
235.80.68.83 port1.0.11 00:00:12 00:04:15 10.10.0.40
239.255.255.250 port1.0.3 00:00:12 00:04:15 10.10.0.228
239.255.255.254 port1.0.12 00:00:08 00:04:13 10.10.0.84
Parameter
Description
Group Address
Address of the multicast group.
Interface
Port through which the group is reachable.
Uptime
The time in weeks, days, hours, minutes, and seconds that this
multicast group has been known to the device.
Expires
Time (in hours, minutes, and seconds) until the entry expires.
Last Reporter
Last host to report being a member of the multicast group.