Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1840)

SNMP MIBs
Software Reference for x310 Series Switches
69.28 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
atEnvMonv2ContactInputDescription
{ atEnvMonv2ContactInputEntry 4 }
The description of this contact input.
atEnvMonv2ContactInputState
{ atEnvMonv2ContactInputEntry 5 }
Current state of the input contact - closed (1) or open (2).
atEnvMonv2ContactIOutputTable
{ atEnvMonv2 8} Table of information about contact outputs available in the
device that are managed by environment monitoring
hardware, indexed by:
1. atEnvMonv2ContactOutputStackMemberId
2. atEnvMonv2ContactOutputBoardIndex
3. atEnvMonv2ContactOutputIndex
atEnvMonv2ContactOutputEntry
{ atEnvMonv2ContactOutputTable 1 }
atEnvMonv2ContactOutputStackMemberId
{ atEnvMonv2ContactInputEntry 1 }
Index of the stack member hosting this output contact.
atEnvMonv2ContactOutputBoardIndex
{ atEnvMonv2ContactInputEntry 2 }
Index of the board hosting this contact output in the board
table.
atEnvMonv2ContactOutputIndex
{ atEnvMonv2ContactInputEntry 3 }
The numeric identifier of this contact output on its host
board.
atEnvMonv2ContactOutputDescription
{ atEnvMonv2ContactInputEntry 4 }
The description of this contact output.
atEnvMonv2ContactOutputState
{ atEnvMonv2ContactInputEntry 5 }
Current state of the output contact - closed (1) or open (2).
atEnvMonv2ExternalPSUTable
{ atEnvMonv2 9} Table of information about external power supply status
monitored by environment monitoring hardware, indexed
by:
1. atEnvMonv2ExternalPSUStatusStackMemberId
2. atEnvMonv2ExternalPSUStatusBoardIndex
3. atEnvMonv2ExternalPSUStatusIndex
atEnvMonv2ExernalPSUEntry
{ atEnvMonv2ExternalPSUStatusTable 1 }
atEnvMonv2ExternalPSUStackMemberId
{ atEnvMonv2ExternalPSUEntry 1 }
Index of the stack member hosting this external power
supply.
atEnvMonv2ExternalPSUBoardIndex
{ atEnvMonv2ExternalPSUEntry 2 }
Index of the board hosting this external power supply in
the board table.
atEnvMonv2ExternalPSUIndex
{ atEnvMonv2ExternalPSUEntry 3 }
The numeric identifier of this external power supply on its
host board.
atEnvMonv2ExternalPSUDescription
{ atEnvMonv2ExternalPSUEntry 4 }
The description of this external power supply.
atEnvMonv2ExternalPSUState
{ atEnvMonv2ExternalPSUEntry 5 }
Current state of the output contact - good (1) or failed (2).
Table 69-8: Objects defined in AT-ENVMONV2-MIB(cont.)
Object / Object Identifier Description