Allied Telesis AT-9000 Series User Manual
At-9000 series
Table of contents
Document Outline
- Contents
- Figures
- Tables
- Preface
- Section I
- Getting Started
- Chapter 1
- Chapter 2
- Chapter 3
- Chapter 4
- Chapter 5
- Chapter 6
- Section II
- Basic Operations
- Chapter 7
- Basic Switch Management
- Adding a Name to the Switch
- Adding Contact and Location Information
- Displaying Parameter Settings
- Manually Setting the Date and Time
- Pinging Network Devices
- Resetting the Switch
- Restoring the Default Settings to the Switch
- Setting the Baud Rate of the Console Port
- Configuring the Management Session Timers
- Setting the Maximum Number of Manager Sessions
- Configuring the Banners
- Basic Switch Management
- Chapter 8
- Basic Switch Management Commands
- BANNER EXEC
- BANNER LOGIN
- BANNER MOTD
- BAUD-RATE SET
- CLOCK SET
- ERASE STARTUP-CONFIG
- EXEC-TIMEOUT
- HELP
- HOSTNAME
- LINE CONSOLE
- LINE VTY
- NO HOSTNAME
- PING
- PING IPv6
- REBOOT
- RELOAD
- SERVICE MAXMANAGER
- SHOW BANNER LOGIN
- SHOW BAUD-RATE
- SHOW CLOCK
- SHOW RUNNING-CONFIG
- SHOW SWITCH
- SHOW SYSTEM
- SHOW SYSTEM SERIALNUMBER
- SHOW USERS
- SHOW VERSION
- SNMP-SERVER CONTACT
- SNMP-SERVER LOCATION
- SYSTEM TERRITORY
- Basic Switch Management Commands
- Chapter 9
- Port Parameters
- Adding Descriptions
- Setting the Speed and Duplex Mode
- Setting the MDI/MDI-X Wiring Configuration
- Enabling or Disabling Ports
- Enabling or Disabling Backpressure
- Enabling or Disabling Flow Control
- Resetting Ports
- Configuring Threshold Limits for Ingress Packets
- Displaying Threshold Limit Settings on Ports
- Reinitializing Auto-Negotiation
- Restoring the Default Settings
- Displaying Port Settings
- Displaying or Clearing Port Statistics
- Displaying SFP Information
- Port Parameters
- Chapter 10
- Port Parameter Commands
- BACKPRESSURE
- BPLIMIT
- CLEAR PORT COUNTER
- DESCRIPTION
- DUPLEX
- EGRESS-RATE-LIMIT
- FCTRLLIMIT
- FLOWCONTROL
- HOLBPLIMIT
- NO EGRESS-RATE-LIMIT
- NO FLOWCONTROL
- NO SHUTDOWN
- NO SNMP TRAP LINK-STATUS
- NO STORM-CONTROL
- POLARITY
- PURGE
- RENEGOTIATE
- RESET
- SHOW FLOWCONTROL INTERFACE
- SHOW INTERFACE
- SHOW INTERFACE BRIEF
- SHOW INTERFACE STATUS
- SHOW PLATFORM TABLE PORT COUNTERS
- SHOW RUNNING-CONFIG INTERFACE
- SHOW STORM-CONTROL
- SHOW SYSTEM PLUGGABLE
- SHOW SYSTEM PLUGGABLE DETAIL
- SHUTDOWN
- SNMP TRAP LINK-STATUS
- SPEED
- STORM-CONTROL
- Port Parameter Commands
- Chapter 11
- Chapter 12
- Power Over Ethernet Commands
- CLEAR POWER-INLINE COUNTERS INTERFACE
- NO POWER-INLINE ALLOW-LEGACY
- NO POWER-INLINE DESCRIPTION
- NO POWER-INLINE ENABLE
- NO POWER-INLINE MAX
- NO POWER-INLINE PRIORITY
- NO POWER-INLINE USAGE-THRESHOLD
- NO SERVICE POWER-INLINE
- NO SNMP-SERVER ENABLE TRAP POWER-INLINE
- POWER-INLINE ALLOW-LEGACY
- POWER-INLINE DESCRIPTION
- POWER-INLINE ENABLE
- POWER-INLINE MAX
- POWER-INLINE PRIORITY
- POWER-INLINE USAGE-THRESHOLD
- SERVICE POWER-INLINE
- SHOW POWER-INLINE
- SHOW POWER-INLINE COUNTERS INTERFACE
- SHOW POWER-INLINE INTERFACE
- SHOW POWER-INLINE INTERFACE DETAIL
- SNMP-SERVER ENABLE TRAP POWER-INLINE
- Power Over Ethernet Commands
- Chapter 13
- Chapter 14
- Chapter 15
- Chapter 16
- Chapter 17
- Chapter 18
- Chapter 19
- Enhanced Stacking
- Overview
- Configuring the Command Switch
- Configuring a Member Switch
- Managing the Member Switches of an Enhanced Stack
- Changing the Enhanced Stacking Mode
- Uploading Boot Configuration Files from the Command Switch to Member Switches
- Uploading the Management Software from the Command Switch to Member Switches
- Disabling Enhanced Stacking
- Enhanced Stacking
- Chapter 20
- Chapter 21
- Chapter 22
- Chapter 23
- Chapter 24
- Chapter 25
- Section III
- Section IV
- Section V
- Section VI
- Spanning Tree Protocols
- Chapter 40
- STP, RSTP and MSTP Protocols
- Overview
- Bridge Priority and the Root Bridge
- Path Costs and Port Costs
- Port Priority
- Forwarding Delay and Topology Changes
- Hello Time and Bridge Protocol Data Units (BPDU)
- Point-to-Point and Edge Ports
- Mixed STP and RSTP Networks
- Spanning Tree and VLANs
- RSTP and MSTP BPDU Guard
- STP, RSTP, MSTP Loop Guard
- STP and RSTP Root Guard
- STP, RSTP and MSTP Protocols
- Chapter 41
- Chapter 42
- STP Commands
- NO SPANNING-TREE STP ENABLE
- SHOW SPANNING-TREE
- SPANNING-TREE FORWARD-TIME
- SPANNING-TREE GUARD ROOT
- SPANNING-TREE HELLO-TIME
- SPANNING-TREE MAX-AGE
- SPANNING-TREE MODE STP
- SPANNING-TREE PATH-COST
- SPANNING-TREE PORTFAST
- SPANNING-TREE PORTFAST BPDU-GUARD
- SPANNING-TREE PRIORITY (Bridge Priority)
- SPANNING-TREE Priority (Port Priority)
- SPANNING-TREE STP ENABLE
- STP Commands
- Chapter 43
- Chapter 44
- RSTP Commands
- NO SPANNING-TREE PORTFAST
- NO SPANNING-TREE ERRDISABLE-TIMEOUT ENABLE
- NO SPANNING-TREE LOOP-GUARD
- NO SPANNING-TREE PORTFAST BPDU-GUARD
- NO SPANNING-TREE RSTP ENABLE
- SHOW SPANNING-TREE
- SPANNING-TREE ERRDISABLE-TIMEOUT ENABLE
- SPANNING-TREE ERRDISABLE-TIMEOUT INTERVAL
- SPANNING-TREE FORWARD-TIME
- SPANNING-TREE GUARD ROOT
- SPANNING-TREE HELLO-TIME
- SPANNING-TREE LINK-TYPE
- SPANNING-TREE LOOP-GUARD
- SPANNING-TREE MAX-AGE
- SPANNING-TREE MODE RSTP
- SPANNING-TREE PATH-COST
- SPANNING-TREE PORTFAST
- SPANNING-TREE PORTFAST BPDU-GUARD
- SPANNING-TREE PRIORITY (Bridge Priority)
- SPANNING-TREE PRIORITY (Port Priority)
- SPANNING-TREE RSTP ENABLE
- RSTP Commands
- Chapter 45
- Chapter 46
- MSTP Commands
- INSTANCE MSTI-ID PRIORITY
- INSTANCE MSTI-ID VLAN
- NO SPANNING-TREE ERRDISABLE-TIMEOUT ENABLE
- NO SPANNING-TREE PORTFAST
- NO SPANNING-TREE MSTP ENABLE
- SHOW SPANNING-TREE
- SHOW SPANNING-TREE MST CONFIG
- SHOW SPANNING-TREE MST
- SHOW SPANNING-TREE MST INSTANCE
- SPANNING-TREE ERRDISABLE-TIMEOUT ENABLE
- SPANNING-TREE ERRDISABLE-TIMEOUT INTERVAL
- SPANNING-TREE GUARD ROOT
- SPANNING-TREE MODE MSTP
- SPANNING-TREE MSTP ENABLE
- SPANNING-TREE MST CONFIGURATION
- SPANNING-TREE MST INSTANCE
- SPANNING-TREE PATH-COST
- SPANNING-TREE PORTFAST
- SPANNING-TREE PORTFAST BPDU-GUARD
- REGION
- REVISION
- MSTP Commands
- Section VII
- Virtual LANs
- Chapter 47
- Chapter 48
- Chapter 49
- GARP VLAN Registration Protocol
- Overview
- Guidelines
- GVRP and Network Security
- GVRP-inactive Intermediate Switches
- Enabling GVRP on the Switch
- Enabling GIP on the Switch
- Enabling GVRP on the Ports
- Setting the GVRP Timers
- Disabling GVRP Timers on the Switch
- Disabling GVRP on the Ports
- Disabling GIP on the Switch
- Disabling GVRP on the Switch
- Restoring the GVRP Default Settings
- Displaying GVRP
- GARP VLAN Registration Protocol
- Chapter 50
- GARP VLAN Registration Protocol Commands
- CONVERT DYNAMIC VLAN
- GVRP APPLICANT STATE ACTIVE
- GVRP APPLICANT STATE NORMAL
- GVRP ENABLE
- GVRP REGISTRATION
- GVRP TIMER JOIN
- GVRP TIMER LEAVE
- GVRP TIMER LEAVEALL
- NO GVRP ENABLE
- NO GVRP TIMER JOIN
- NO GVRP TIMER LEAVE
- NO GVRP TIMER LEAVEALL
- PURGE GVRP
- SHOW GVRP APPLICANT
- SHOW GVRP CONFIGURATION
- SHOW GVRP MACHINE
- SHOW GVRP STATISTICS
- SHOW GVRP TIMER
- GARP VLAN Registration Protocol Commands
- Chapter 51
- Chapter 52
- Chapter 53
- Chapter 54
- Chapter 55
- Chapter 56
- Chapter 57
- Section VIII
- Port Security
- Chapter 58
- Chapter 59
- Chapter 60
- 802.1x Port-based Network Access Control
- Overview
- Authentication Process
- Port Roles
- Authentication Methods for Authenticator Ports
- Operational Settings for Authenticator Ports
- Operating Modes for Authenticator Ports
- Supplicant and VLAN Associations
- Guest VLAN
- RADIUS Accounting
- General Steps
- Guidelines
- Enabling 802.1x Port-Based Network Access Control on the Switch
- Configuring Authenticator Ports
- Configuring Reauthentication
- Removing Ports from the Authenticator Role
- Disabling 802.1x Port-Based Network Access Control on the Switch
- Displaying Authenticator Ports
- Displaying EAP Packet Statistics
- 802.1x Port-based Network Access Control
- Chapter 61
- 802.1x Port-based Network Access Control Commands
- AAA AUTHENTICATION DOT1X DEFAULT GROUP RADIUS
- AUTH DYNAMIC-VLAN-CREATION
- AUTH GUEST-VLAN
- AUTH HOST-MODE
- AUTH REAUTHENTICATION
- AUTH TIMEOUT QUIET-PERIOD
- AUTH TIMEOUT REAUTH-PERIOD
- AUTH TIMEOUT SERVER-TIMEOUT
- AUTH TIMEOUT SUPP-TIMEOUT
- AUTH-MAC ENABLE
- AUTH-MAC REAUTH-RELEARNING
- DOT1X CONTROL-DIRECTION
- DOT1X EAP
- DOT1X INITIALIZE INTERFACE
- DOT1X MAX-REAUTH-REQ
- DOT1X PORT-CONTROL AUTO
- DOT1X PORT-CONTROL FORCE-AUTHORIZED
- DOT1X PORT-CONTROL FORCE-UNAUTHORIZED
- DOT1X TIMEOUT TX-PERIOD
- NO AAA AUTHENTICATION DOT1X DEFAULT GROUP RADIUS
- NO AUTH DYNAMIC-VLAN-CREATION
- NO AUTH GUEST-VLAN
- NO AUTH REAUTHENTICATION
- NO AUTH-MAC ENABLE
- NO DOT1X PORT-CONTROL
- SHOW AUTH-MAC INTERFACE
- SHOW AUTH-MAC SESSIONSTATISTICS INTERFACE
- SHOW AUTH-MAC STATISTICS INTERFACE
- SHOW AUTH-MAC SUPPLICANT INTERFACE
- SHOW DOT1X
- SHOW DOT1X INTERFACE
- SHOW DOT1X STATISTICS INTERFACE
- SHOW DOT1X SUPPLICANT INTERFACE
- 802.1x Port-based Network Access Control Commands
- Section IX
- Simple Network Management Protocols
- Chapter 62
- Chapter 63
- SNMPv1 and SNMPv2c Commands
- NO SNMP-SERVER
- NO SNMP-SERVER COMMUNITY
- NO SNMP-SERVER ENABLE TRAP
- NO SNMP-SERVER ENABLE TRAP AUTH
- NO SNMP-SERVER HOST
- NO SNMP-SERVER VIEW
- NO SNMP TRAP LINK-STATUS
- SHOW RUNNING-CONFIG SNMP
- SHOW SNMP-SERVER
- SHOW SNMP-SERVER COMMUNITY
- SHOW SNMP-SERVER VIEW
- SNMP-SERVER
- SNMP-SERVER COMMUNITY
- SNMP-SERVER ENABLE TRAP
- SNMP-SERVER ENABLE TRAP AUTH
- SNMP-SERVER HOST
- SNMP-SERVER VIEW
- SNMP TRAP LINK-STATUS
- SNMPv1 and SNMPv2c Commands
- Chapter 64
- SNMPv3 Commands
- NO SNMP-SERVER
- NO SNMP-SERVER ENGINEID LOCAL
- NO SNMP-SERVER GROUP
- NO SNMP-SERVER HOST
- NO SNMP-SERVER USER
- NO SNMP-SERVER VIEW
- SHOW SNMP-SERVER
- SHOW SNMP-SERVER GROUP
- SHOW SNMP-SERVER HOST
- SHOW SNMP-SERVER USER
- SHOW SNMP-SERVER VIEW
- SNMP-SERVER
- SNMP-SERVER ENGINEID LOCAL
- SNMP-SERVER GROUP
- SNMP-SERVER HOST
- SNMP-SERVER USER
- SNMP-SERVER VIEW
- SNMPv3 Commands
- Section X
- Network Management
- Chapter 65
- Chapter 66
- Chapter 67
- LLDP and LLDP-MED
- Overview
- Enabling LLDP and LLDP-MED on the Switch
- Configuring Ports to Only Receive LLDP and LLDP-MED TLVs
- Configuring Ports to Send Only Mandatory LLDP TLVs
- Configuring Ports to Send Optional LLDP TLVs
- Configuring Ports to Send Optional LLDP-MED TLVs
- Configuring Ports to Send LLDP-MED Civic Location TLVs
- Configuring Ports to Send LLDP-MED Coordinate Location TLVs
- Configuring Ports to Send LLDP-MED ELIN Location TLVs
- Removing LLDP TLVs from Ports
- Removing LLDP-MED TLVs from Ports
- Deleting LLDP-MED Location Entries
- Disabling LLDP and LLDP-MED on the Switch
- Displaying General LLDP Settings
- Displaying Port Settings
- Displaying or Clearing Neighbor Information
- Displaying Port TLVs
- Displaying and Clearing Statistics
- LLDP and LLDP-MED
- Chapter 68
- LLDP and LLDP-MED Commands
- CLEAR LLDP STATISTICS
- CLEAR LLDP TABLE
- LLDP HOLDTIME-MULTIPLIER
- LLDP LOCATION
- LLDP MANAGEMENT-ADDRESS
- LLDP MED-NOTIFICATIONS
- LLDP MED-TLV-SELECT
- LLDP NON-STRICT-MED-TLV-ORDER-CHECK
- LLDP NOTIFICATIONS
- LLDP NOTIFICATION-INTERVAL
- LLDP REINIT
- LLDP RUN
- LLDP TIMER
- LLDP TLV-SELECT
- LLDP TRANSMIT RECEIVE
- LLDP TX-DELAY
- LOCATION CIVIC-LOCATION
- LOCATION COORD-LOCATION
- LOCATION ELIN-LOCATION
- NO LLDP MED-NOTIFICATIONS
- NO LLDP MED-TLV-SELECT
- NO LLDP NOTIFICATIONS
- NO LLDP RUN
- NO LLDP TLV-SELECT
- NO LLDP TRANSMIT RECEIVE
- NO LOCATION
- SHOW LLDP
- SHOW LLDP INTERFACE
- SHOW LLDP LOCAL-INFO INTERFACE
- SHOW LLDP NEIGHBORS DETAIL
- SHOW LLDP NEIGHBORS INTERFACE
- SHOW LLDP STATISTICS
- SHOW LLDP STATISTICS INTERFACE
- SHOW LOCATION
- LLDP and LLDP-MED Commands
- Chapter 69
- Chapter 70
- Chapter 71
- Chapter 72
- Chapter 73
- Chapter 74
- Chapter 75
- Section XI
- Management Security
- Chapter 76
- Local Manager Accounts
- Chapter 77
- Chapter 78
- Chapter 79
- Chapter 80
- Chapter 81
- Chapter 82
- Chapter 83
- Chapter 84
- Chapter 85
- Chapter 86
- Chapter 87
- Chapter 88
- Chapter 89
- RADIUS and TACACS+ Client Commands
- AAA ACCOUNTING LOGIN
- AAA AUTHENTICATION ENABLE (TACACS+)
- AAA AUTHENTICATION LOGIN
- IP RADIUS SOURCE-INTERFACE
- LOGIN AUTHENTICATION
- NO LOGIN AUTHENTICATION
- NO RADIUS-SERVER HOST
- NO TACACS-SERVER HOST
- RADIUS-SERVER HOST
- RADIUS-SERVER KEY
- RADIUS-SERVER TIMEOUT
- SHOW RADIUS
- SHOW TACACS
- TACACS-SERVER HOST
- TACACS-SERVER KEY
- TACACS-SERVER TIMEOUT
- RADIUS and TACACS+ Client Commands
- Appendix A
- Appendix B
- Management Software Default Settings
- Boot Configuration File
- Class of Service
- Console Port
- 802.1x Port-Based Network Access Control
- Enhanced Stacking
- GVRP
- IGMP Snooping
- Link Layer Discovery Protocol (LLDP and LLDP-MED)
- MAC Address-based Port Security
- MAC Address Table
- Management IP Address
- Manager Account
- Port Settings
- RADIUS Client
- Remote Manager Account Authentication
- RMON
- Secure Shell Server
- sFlow Agent
- Simple Network Management Protocol (SNMPv1, SNMPv2c and SNMPv3)
- Simple Network Time Protocol
- Spanning Tree Protocols (STP, RSTP and MSTP)
- System Name
- TACACS+ Client
- Telnet Server
- VLANs
- Web Server
- Command Index
- Management Software Default Settings