Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1350)

Local RADIUS Server Commands
Software Reference for x310 Series Switches
51.22 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
radius-server local
Use this command to navigate to the Local RADIUS server configuration mode
(config-radsrv)
from the Global Configuration mode (config).
Syntax radius-server local
Mode Global Configuration
Example Local RADIUS Server commands are available from config-radsrv configuration
mode. To change mode from User Exec mode to the Local RADIUS Server mode (config-
radsrv), use the commands:
Output
Related Commands server enable
show radius local-server group
show radius local-server nas
show radius local-server statistics
show radius local-server user
awplus# configure terminal
awplus(config)# radius-server local
awplus(config-radsrv)#
awplus(config)#radius-server local
Creating Local CA repository.....OK
Enrolling Local System to local trustpoint..OK
awplus(config-radsrv)#