Auth-web-server ping-poll reauth-timer-refresh – Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 1178
Authentication Commands
Software Reference for x310 Series Switches
43.52
AlliedWare Plus
TM
Operating System - Version 5.4.4C
C613-50046-01 REV A
auth-web-server ping-poll reauth-timer-refresh
This command modifies the reauth-timer-refresh parameter for the web-authentication
feature. The reauth-timer-refresh parameter specifies whether a re-authentication timer
is reset and when the response from a supplicant (a client device) is received.
Use the no variant of this command to reset the reauth-timer-refresh parameter to the
default setting (disabled).
Syntax
auth-web-server ping-poll reauth-timer-refresh
no auth-web-server ping-poll reauth-timer-refresh
Default
The reauth-timer-refresh parameter is disabled by default.
Mode
Global Configuration
Examples
To enable the reauth-timer-refresh timer, use the following commands:
To disable the reauth-timer-refresh timer, use the following commands:
Validation
Commands
show auth-web-server
show running-config
awplus#
configure terminal
awplus(config)#
auth-web-server ping-poll reauth-timer-refresh
awplus#
configure terminal
awplus(config)#
no auth-web-server ping-poll reauth-timer-
refresh