Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 379)

Switching Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 15.17
mac address-table acquire
Use this command to enable MAC address learning on the device.
Use the no variant of this command to disable learning.
Syntax mac address-table acquire
no mac address-table acquire
Default Learning is enabled by default for all instances.
Mode Global Configuration
Example
mac address-table ageing-time
Use this command to specify an ageing-out time for a learned MAC address. The learned
MAC address will persist for at least the specified time.
The no variant of this command will reset the ageing-out time back to the default of 300
seconds (5 minutes).
Syntax mac address-table ageing-time none
no mac address-table ageing-time
Default The default ageing time is 300 seconds.
Mode Global Configuration
Examples The following commands specify various ageing timeouts on the switch:
awplus# configure terminal
awplus(config)# mac address-table acquire
Parameter Description
<10-1000000> The number of seconds of persistence.
none Disable learned MAC address timeout.
awplus# configure terminal
awplus(config)# mac address-table ageing-time 1000
awplus# configure terminal
awplus(config)# mac address-table ageing-time none
awplus# configure terminal
awplus(config)# no mac address-table ageing-time