Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1174)

Authentication Commands
Software Reference for x310 Series Switches
43.48 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
To disable the intercept mode on the web authentication server, use the following
commands:
To reset the intercept mode to the default setting of none on the web authentication
server, use the following commands:
To enable the promiscuous mode on the web authentication server, resulting in the switch
intercepting and replying to any ARP or DNS messages from any IP address, use the
following commands:
To disable the promiscuous mode on the web authentication server, use the following
commands:
Validation
Commands
show running-config
Related Commands show auth-web-server
awplus# configure terminal
awplus(config)# no auth-web-server mode intercept
awplus# configure terminal
awplus(config)# auth-web-server mode none
awplus# configure terminal
awplus(config)# auth-web-server mode promiscuous
awplus# configure terminal
awplus(config)# no auth-web-server mode promiscuous