Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 782)

IGMP Snooping Commands
Software Reference for x310 Series Switches
31.44 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
show ip igmp snooping mrouter
Use this command to display the multicast router ports, both static and dynamic, in a
VLAN.
For information on output options, see “Controlling “show” Command Output” on
page 1.37 .
Syntax show ip igmp snooping mrouter [interface <interface>]
Mode User Exec and Privileged Exec
Example To show all multicast router interfaces, use the command:
To show the multicast router interfaces in vlan1, use the command:
Output Figure 31-3: Example output from the show ip igmp snooping mrouter command
Figure 31-4: Example output from the show ip igmp snooping mrouter interface
vlan1 command
Related Commands ip igmp snooping mrouter
Parameter Description
interface A specific interface.
<interface> The name of the VLAN interface.
awplus# show ip igmp snooping mrouter
awplus# show ip igmp snooping mrouter interface vlan1
VLAN Interface Static/Dynamic
1 port1.0.5 Statically configured
200 port1.0.2 Statically configured
VLAN Interface Static/Dynamic
1 port1.0.5 Statically configured