Normal-interval, Normal-interval <1-65536 – Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual

Page 2069

Ping-Polling Commands

Software Reference for x310 Series Switches

C613-50046-01 REV A

AlliedWare Plus

Operating System - Version 5.4.4C

79.11

normal-interval

This command specifies the time period between pings when the device is reachable.

The no variant of this command resets the time period to the default of 30 seconds.

Syntax

normal-interval <1-65536>

no normal-interval

Default

The default is 30 seconds.

Mode

Ping-Polling Configuration

Examples

To specify a time period of 60 seconds between pings when the device is reachable for
ping-poll instance 45, use the commands:

To reset the interval to the default of 30 seconds for ping-poll instance 45, use the
commands:

Related Commands

critical-interval
fail-count
ping-poll
sample-size
show ping-poll
timeout (ping polling)
up-count

Parameter

Description

<1-65536>

Time in seconds between pings when the target is reachable.

awplus#

configure terminal

awplus(config)#

ping-poll 45