Show lldp statistics – Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 1974
LLDP Commands
Software Reference for x310 Series Switches
71.48
AlliedWare Plus
TM
Operating System - Version 5.4.4C
C613-50046-01 REV A
show lldp statistics
This command displays the global LLDP statistics (packet and event counters).
Syntax
show lldp statistics
Mode
User Exec and Privileged Exec
Example
To display global LLDP statistics information, use the command:
Output
Related Commands
clear lldp statistics
show lldp statistics interface
awplus#
show lldp statistics
Figure 71-7: Example output from the show lldp statistics command
awplus# show lldp statistics
Global LLDP Packet and Event counters:
Frames: Out ................... 345
In .................... 423
In Errored ............ 0
In Dropped ............ 0
TLVs: Unrecognized .......... 0
Discarded ............. 0
Neighbors: New Entries ........... 20
Deleted Entries ....... 20
Dropped Entries ....... 0
Entry Age-outs ........ 20
Table 71-7: Parameters in the output of the show lldp statistics command
Parameter
Description
Frames Out
Number of LLDPDU frames transmitted.
Frames In
Number of LLDPDU frames received.
Frames In Errored
Number of invalid LLDPDU frames received.
Frames In Dropped
Number of LLDPDU frames received and discarded for any
reason.
TLVs Unrecognized
Number of LLDP TLVs received that are not recognized but
the TLV type is in the range of reserved TLV types.
TLVs Discarded
Number of LLDP TLVs discarded for any reason.
Neighbors New
Entries
Number of times the information advertised by neighbors
has been inserted into the neighbor table.
Neighbors Deleted
Entries
Number of times the information advertised by neighbors
has been removed from the neighbor table.
Neighbors Dropped
Entries
Number of times the information advertised by neighbors
could not be entered into the neighbor table because of
insufficient resources.
Neighbors Entry
Age-outs Entries
Number of times the information advertised by neighbors
has been removed from the neighbor table because the
information TTL interval has expired.