Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 308)

Logging Commands
Software Reference for x310 Series Switches
10.36 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
show exception log
This command displays the contents of the exception log. When used within a stacked
environment, this command will display the contents of the exception log for all the stack
members.
Syntax show exception log
Mode User Exec and Privileged Exec
Example To display the exception log, use the command:
Output Figure 10-2: Example output from the show exception log command on a switch
awplus# show exception log
awplus#show exception log
Stack member 1:
. ]>:
-------------------------------------------------------------------------
2014 Jan 27 09:57:47 local7.debug awplus corehandler : Process imish (PID:3746)
signal 11, core dumped to /flash/imish-x610-5.4.3-3.7-1-1390816667-3746.tgz
2014 Jan 27 09:57:47 local7.debug awplus corehandler : Process imish (PID:2504)
signal 11, core dumped to /flash/imish-x610-5.4.3-3.7-1-1390816667-2504.tgz
2014 Jan 27 09:58:02 local7.debug awplus corehandler : Process ospfd (PID:1512)
signal 5, core dumped to /flash/ospfd-x610-5.4.3-3.7-1-1390816682-1512.tgz
-------------------------------------------------------------------------
Stack member 2:
. ]>:
-------------------------------------------------------------------------
2014 Jan 27 09:58:16 local7.debug awplus-2 corehandler : Process imi (PID:1427)
signal 5, core dumped to /flash/imi-x610-5.4.3-3.7-2-1390816696-1427.tgz
-------------------------------------------------------------------------