Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1818)

SNMP MIBs
Software Reference for x310 Series Switches
69.6 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
AT-ALMMON-MIB
AT-ALMMON-MIB defines objects for managing alarms Table 69-1 . Objects in this group
have the object identifier sysinfo ({ atRouter 3 }). All objects in this group have read only
access.
Table 69-1: .Objects defined by the atAlmMon MIB
Object / Object Identifier Description
atAlmMon
{ atAlmMon 24 }
(OID 1.3.6.1.4.1.207.8.4.4.3.26)
The AT Alarm Monitoring v2 MIB for managing and
reporting device alarms.
atAlmMonActionEntryTable
{ atAlmMon 1}
(207.8.4.4.3.24.1)
Table of information defining alarm monitoring inputs and
consequent actions (i.e., fault LED and relay outputs),
indexed by:
1. atAlmMonActionStackMemberId
2. atAlmMonActionIndex
atAlmMonActionEntry
{ atAlmMonActionTable 1 }
(207.8.4.4.3.24.1.1)
A description and configuration of what to do for a specific
monitored alarm.
atAlmMonActionStackMemberId
{ atAlmMonActionEntry 1 }
(207.8.4.4.3.24.1.1.1)
The index of the stack member of this alarm action.
atAlmMonActionIndex
{ atAlmMonActionEntry 2 }
(207.8.4.4.3.24.1.1.2)
The numeric identifier of this alarm action.
atAlmMonAlarmType
{ alAlmMonActionEntry 3 }
(207.8.4.4.3.24.1.1.3)
The type of alarm that this action monitors. Values can be:
1. alarmTypeInvalid (0)
2. externalPSU (1)
3. epsr (2)
4. contactInput (3)
5. portLinkDown (4)
6. loopDetect (5)
7. mainPse (6)
8. portPoeFailure (7)
9. temperature (8)
atAlmMonAlarmTypeSelection
{ atAlmMonActionEntry 4}
The 1-based index of the alarm of the particular type (as
categorized by AlmMonAlarmType).
atAlmMonActionDescription
{ atAlmMonActionEntry 5}
The description of this alarm monitoring entry.
atAlmMonActionUseRelay1
{ atAlmMonActionEntry 6 }
Indicates/controls whether or not this alarm monitor
drives the first relay output. Values can be:
■
Unused (1)
■
Used (2)
atAlmMonActionUseRelay2
{ alAlmMonActionEntry 7 }
Indicates/controls whether or not this alarm monitor
drives the second relay output. Values can be:
■ Unused (1)
■
Used (2)