Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 2123)

VCStack Introduction
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 82.9
Stack member identification
When a switch becomes a stack member, it is assigned a Stack Member ID. A numeric ID
LED on the front panel indicates its stack member ID number. See
Figure 82-8 on
page 82.9 . Switches in a VCStack usually have stack IDs in the range 1 to 4 (although any
four numbers between 1 and 8 can be assigned). A stand-alone switch displays the ID
number 0.
Figure 82-8: Stack Member ID Display
In addition, depressing the “eco” button on this panel will change the LED display to
indicate the status of the switch within a stack, or whether it is operating as a stand alone
switch. See
Figure 82-8 on page 82.9 .
Figure 82-9: Stack_Member_Status Display
x 310_Stack_Member_Display
S2/28
S1/27
CONSOLE
The switch is the master switch of a VCStack.
The switch is operating as a stand alone unit.
The switch is a backup member of the VCStack.
x 310_Stack_Member_Status