Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual

Page 1861

SNMP MIBs

Software Reference for x310 Series Switches

C613-50046-01 REV A

AlliedWare Plus

Operating System - Version 5.4.4C

69.49

Table 69-13: Objects Defined in the AT-Loop Protect MIB

Object

Object Identifier

Description

{ atLoopProtect }

{ modules 54 }

The root of the Loop Protect object sub tree.

{ atLoopProtectTrap }

{ atLoopProtect0 }

The Loop Protection node state transition trap.
List of traps (notifications) generated for Loop
Protection.

{ atLoopProtectDetected
LoopBlockedTrap }

{ atLoopProtectTrap1 }

Notification generated when the Loop
Protection feature blocks an interface with a
loop. The following bindings are associated with
this trap:

1. atLoopProtectIfIndex

2. atLoopProtectVlanId
3. atLoopProtectAction

{ atLoopProtectRecover
LoopBlockedTrap }

{ atLoopProtectTrap2 }

Notification generated when the Loop
Protection feature restores a blocked interface
back to normal operation. The following
bindings are associated with this trap:

1. atLoopProtectIfIndex

2. atLoopProtectVlanId
3. atLoopProtectAction

{ atLoopProtectDetected
ByLoopDetectionTrap }

{ atLoopProtectTrap3 }

Notification generated when the Loop
Protection feature detects a loop by Loop
Detection method. The following bindings are
associated with this trap:

1. atLoopProtectIfIndex

2. atLoopProtectVlanId
3. atLoopProtectRxLDFIfIndex
4. atLoopProtectRxLDFVlanId

{ atLoopProtectAction }

{ atLoopProtect1 }

The Action for the Loop Protection feature. The
following values are defined:

1. atLoopProtectAction-LearnDisable (0)

2. atLoopProtectAction-LearnEnable (1)
3. atLoopProtectAction-PortDisable (2)
4. atLoopProtectAction-PortEnable (3)
5. atLoopProtectAction-LinkDown (4)
6. atLoopProtectAction-LinkUp (5)
7. atLoopProtectAction-VlanDisable (6)
8. atLoopProtectAction-VlanEnable (7)

{ atLoopProtectIfIndex }

{ atLoopProtect2 }

The interface on which the loop was detected.

{ atLoopProtectVlanId }

{ atLoopProtect3 }

The VLAN ID on which the loop was detected.

{ atLoopProtectRxLDFIfIndex }

{ atLoopProtect4 }

The interface on which the loop detection frame
was received.

{ atLoopProtectRxLDFVlanId }

{ atLoopProtect5 }

The VLAN ID on which the loop detection frame
was received.