Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 792)

MLD and MLD Snooping Introduction and Commands
Software Reference for x310 Series Switches
32.8 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
clear ipv6 mld group
Use this command to clear MLD specific local-membership(s) on all interfaces, for a
particular group.
Syntax clear ipv6 mld group {*|>}
Mode Privileged Exec
Usage This command applies to interfaces configured for MLD Layer-3 multicast protocols and
learned by MLD Snooping.
Example
Related Commands clear ipv6 mld
clear ipv6 mld interface
clear ipv6 mld interface
Use this command to clear MLD interface entries.
Syntax clear ipv6 mld interface <interface>
Mode Privileged Exec
Usage This command applies to interfaces configured for MLD Layer-3 multicast protocols and
learned by MLD Snooping.
Example
Related Commands clear ipv6 mld
clear ipv6 mld group
Parameter Description
* Clears all groups on all interfaces. This is an alias to the clear
ipv6 mld command.
<ipv6-address>
Specify the group address for which MLD local-memberships
are to be cleared from all interfaces.
Specify the IPv6 multicast group address in the format in the
format X:X::X:X.
awplus# clear ipv6 mld group *
Parameter Description
<interface> Specifies name of the interface; all groups learned from this interface
are deleted.
awplus# clear ipv6 mld interface vlan2