Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1642)

AMF Commands
Software Reference for x310 Series Switches
60.54 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
show atmf links detail
By default, the following commands display various levels of detail about all the AMF links
configured on the device and also display detailed statistics about the AMF packet
exchanges between the devices.
It is also possible to display the AMF link configuration and packet exchange statistics for a
specified interface.
Syntax show atmf links detail
Mode User Exec
Example To display the AMF link details use this command
The output from this command will display all the internal data held for AMF links.
Parameter Description
links AMF links.
brief Brief summary of AMF links configuration and status.
detail Detailed AMF links information.
node_1# show atmf links detail
Figure 60-13: Sample output from the show atmf links detail command.
ATMF Links Detail:
Port : sa1
Ifindex : 4501
VR ID : 0
Port Status : Up
Port State : Full
Port BPDU Receive Count : 44441
Adjacent Node Name : Building_2
Adjacent Ifindex : 4501
Adjacent VR ID : 0
Adjacent MAC : 0014.2299.137d
Port Last Message Response : 0