Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 194)

File Management Commands
Software Reference for x310 Series Switches
7.48 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
show running-config router
Use the show running-config router command to display the current running
configuration for a given router.
For information on output options, see “Controlling “show” Command Output” on
page 1.37 .
Syntax show running-config router <protocol>
Mode Privileged Exec and Global Configuration
Example To display the current running configuration for a given router, use the command:
Output Figure 7-23: Example output from the show running-config router command
Related Commands copy running-config
show running-config
Parameter Description
<protocol> vrrp
vrrp Virtual Redundancy Routing Protocol (VRRP)
awplus# show running-config router ospf
!
router ospf
network 192.168.1.0/24 area 0.0.0.0
network 192.168.3.0/24 area 0.0.0.0
!