Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 2048)

Trigger Commands
Software Reference for x310 Series Switches
77.28 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
type stack link
This command (configured to the stack) initiates the action of a pre-configured trigger to
occur when a stacking link is either activated or deactivated.
Syntax type stack link {up|down}
Mode Trigger Configuration
Example To configure trigger 86 to activate when the stack link down event occurs, use the
commands:
Related Commands show trigger
trigger
type stack master-fail
type time
This command configures a trigger that activates at a specified time of day.
Syntax type time <hh:mm>
Mode Trigger Configuration
Usage A combined limit of 10 triggers of the type time and type periodic can be configured. If
you attempt to add more than 10 triggers the following error message is displayed:
Example To configure trigger 86 to activate at 15:53, use the following commands:
Related Commands show trigger
trigger
Parameter Description
up Stack link up event
down Stack link down event
awplus# configure terminal
awplus(config)# trigger 86
awplus(config-trigger)# type stack link down
Parameter Description
<hh:mm> The time to activate the trigger.
% Cannot configure more than 10 triggers with the type time or
periodic
awplus# configure terminal
awplus(config)# trigger 86
awplus(config-trigger)# type time 15:53