Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 508)

Spanning Tree Commands
Software Reference for x310 Series Switches
19.18 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
show spanning-tree mst config
Use this command to display MSTP configuration identifier for the device.
For information on output options, see “Controlling “show” Command Output” on
page 1.37 .
Syntax show spanning-tree mst config
Mode User Exec, Privileged Exec and Interface Configuration
Usage The region name, the revision number, and the digest of the VLAN to MSTI configuration
table must be the same on all devices that are intended to be in the same MST region.
Example To display MSTP configuration identifier information, enter the command:
Output Figure 19-6: Example output from the show spanning-tree mst config command
Related Commands instance vlan (MSTP)
region (MSTP)
revision (MSTP)
awplus# show spanning-tree mst config
awplus#show spanning-tree mst config
%
% MSTP Configuration Information:
%------------------------------------------------------
% Format Id : 0
% Name : My Name
% Revision Level : 0
% Digest : 0x80DEE46DA92A98CF21C603291B22880A
%------------------------------------------------------