Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 300)

Logging Commands
Software Reference for x310 Series Switches
10.28 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
log monitor (filter)
This command creates a filter to select messages to be sent to the terminal when the
terminal monitor command is given. Selection can be based on the priority/severity of the
message, the program that generated the message, the logging facility used, a sub-string
within the message or a combination of some or all of these.
Syntax log monitor [level ] [program ]
[facility ] [msgtext ]
no log monitor [level ] [program ]
[facility ] [msgtext ]
Parameter Description
level Filter messages to the permanent log by severity level.
<level> The minimum severity of message to send to the log. The level can be
specified as one of the following numbers or level names, where 0 is
the highest severity and 7 is the lowest severity:
0|emergencies: System is unusable
1|alerts Action must be taken immediately
2|critical Critical conditions
3|errors Error conditions
4|warnings Warning conditions
5|notices Normal, but significant, conditions
6|informational Informational messages
7|debugging Debug-level messages
program Filter messages to the permanent log by program. Include messages
from a specified program in the log.
<program-
name> The name of a program to log messages from, either one of the
following predefined program names (not case-sensitive), or another
program name (case -sensitive) that you find in the log output.
rsvp Resource Reservation Protocol (RSVP)
dot1x IEEE 802.1X Port-Based Access Control
lacp Link Aggregation Control Protocol (LACP)
stp Spanning Tree Protocol (STP)
rstp Rapid Spanning Tree Protocol (RSTP)
mstp Multiple Spanning Tree Protocol (MSTP)
imi Integrated Management Interface (IMI)
<program-
name>
(cont.) imish Integrated Management Interface Shell (IMISH)
epsr Ethernet Protection Switched Rings (EPSR)
irdp ICMP Router Discovery Protocol (IRDP)
rmon Remote Monitoring
loopprot Loop Protection
poe Power-inline (Power over Ethernet)
dhcpsn DHCP snooping (DHCPSN)
facility Filter messages to the permanent log by syslog facility.