Show atmf tech – Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 1654

AMF Commands
Software Reference for x310 Series Switches
60.66
AlliedWare Plus
TM
Operating System - Version 5.4.4C
C613-50046-01 REV A
show atmf tech
This command collects and displays all the AMF command output. The command can thus
be used to display a complete picture of an AMF network.
Syntax
show atmf tech
Mode
Privileged Exec
Example
To display output for all AMF commands, use the command:
Parameter
Description
show
Show running system information
atmf
The Allied Telesis Management Framework (AMF)
tech
Global AMF information
node_1#
show atmf tech
Figure 60-20: Sample output from the show atmf tech command.
node1#show atmf tech
ATMF Summary Information:
ATMF Status
: Enabled
Network Name
: ATMF_NET
Node Name
: node1
Role
: Master
Current ATMF Nodes : 8
ATMF Technical information:
Network Name
: ATMF_NET
Domain
: node1's domain
Node Depth
: 0
Domain Flags
: 0
Authentication Type
: 0
MAC Address
: 0014.2299.137d
Board ID
: 287
Domain State
: DomainController
Domain Controller
: node1
Backup Domain Controller
: node2
Domain controller MAC
: 0014.2299.137d
Parent Domain
: -
Parent Domain Controller
: -
Parent Domain Controller MAC
: 0000.0000.0000
Number of Domain Events
: 0
Crosslink Ports Blocking
: 0
Uplink Ports Waiting on Sync
: 0
Crosslink Sequence Number
: 7
Domains Sequence Number
: 28
Uplink Sequence Number
: 2
Number of Crosslink Ports
: 1
Number of Domain Nodes
: 2
Number of Neighbors
: 5
Number of Non Broadcast Neighbors : 3
Number of Link State Entries
: 1
Number of Up Uplinks
: 0
Number of Up Uplinks on This Node : 0
DBE Checksum
: 84fc6
Number of DBE Entries
: 0
Management Domain Ifindex
: 4391
Management Domain VLAN
: 4091
Management ifindex
: 4392
Management VLAN
: 4092
...
...