Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1758)

DHCP for IPv6 (DHCPv6) Commands
Software Reference for x310 Series Switches
66.6 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
show ipv6 dhcp interface
Use this command in User Exec or Privileged Exec mode to display DHCPv6 information
for a specified interface, or all interfaces when entered without the interface parameter.
For information on output options, see “Controlling “show” Command Output” on
page 1.37 .
Syntax show ipv6 dhcp interface [<interface-name>]
Mode User Exec and Privileged Exec
Example To display DHCPv6 information for all interfaces DHCPv6 is configured on, use the
command:
Output Figure 66-3: Example output from the show ipv6 dhcp interface command
Parameter Description
Optional. Specify the name of the interface to show DHCPv6
information about. Omit this optional parameter to display
DHCPv6 information for all interfaces DHCPv6 is configured on.
awplus# show ipv6 dhcp interface
awplus# show ipv6 dhcp interface
vlan1 is in client mode
Address 1001::3c0:1
preferred lifetime 9000, valid lifetime 5000
starts at 20 Jan 2012 09:21:35
expires at 20 Jan 2012 10:25:32
Table 66-2: Parameters in the output of the show counter dhcp-client command
Parameter Description
is in client
mode Displays the specified interface in client mode.
Address Displays the address of the DHCPv6 server on the interface.
Preference Displays the preference value for the DHCPv6 server.