Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 184)

File Management Commands
Software Reference for x310 Series Switches
7.38 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
show running-config dhcp
Use this command to display the running configuration for DHCP server, DHCP snooping,
and DHCP relay.
Syntax show running-config dhcp
Mode Privileged Exec and Global Configuration
Example To display to display the running configuration for DHCP server, DHCP snooping, and
DHCP relay:
Output Figure 7-13: Example output from the show running-config dhcp command
Related Commands copy running-config
show running-config
awplus# show running-config dhcp
!
#show running-config dhcp
no service dhcp-server
!
service dhcp-snooping
!
interface port1.0.1
ip dhcp snooping trust
!
interface port1.0.3
ip dhcp snooping max-bindings 25
access-group dhcpsnooping
!
interface port1.0.4
ip dhcp snooping max-bindings 25
access-group dhcpsnooping
!
interface po1
ip dhcp snooping max-bindings 25
arp security violation log
!
interface sa1
ip dhcp snooping max-bindings 25
access-group dhcpsnooping
arp security violation log
!
interface vlan100
ip dhcp snooping
arp security
!
interface vlan200
ip dhcp snooping
arp security
!