Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1311)

Local RADIUS Server Introduction and Configuration
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 50.9
Defined RADIUS attributes list
This is a full list of valid attributes and pre-defined values that may be used in conjunction
with the
attribute command on page 51.2 , to show or configure defined RADIUS
attributes.
Table 50-1 lists all Standard attributes and values, Table 50-2 lists the Vendor-Specific
attribute (attribute ID 26) names and values.
More detailed information can be found in the following RFCs, defining the attributes and
values for RADIUS server:
■ RFC2865: Remote Authentication Dial In User Service (RADIUS)
■ RFC2866: RADIUS Accounting
■ RFC2867: RADIUS Accounting Modifications for Tunnel Protocol Support
■ RFC2868: RADIUS Attributes for Tunnel Protocol Support
■ RFC2869: RADIUS Extensions
■ RFC3162: RADIUS and IPv6
■ RFC3576: Dynamic Authorization Extensions to Remote Authentication Dial In User
Service (RADIUS)
■ RFC3580: IEEE 802.1X Remote Authentication Dial In User Service (RADIUS) Usage
Guidelines
■ RFC4072: Diameter Extensible Authentication Protocol (EAP) Application
■ RFC4372: Chargeable User Identity
■ RFC4603: Additional Values for the NAS-Port-Type Attribute
■ RFC4675: RADIUS Attributes for Virtual LAN and Priority Support
■ RFC4679: DSL Forum Vendor-Specific RADIUS Attributes
■ RFC4818: RADIUS Delegated-IPv6-Prefix Attribute
■ RFC4849: RADIUS Filter Rule Attribute
■ RFC5176: Dynamic Authorization Extensions to Remote Authentication Dial In User
Service (RADIUS)
■ RFC5580: Carrying Location Objects in RADIUS and Diameter
■ RFC5607: Remote Authentication Dial-In User Service (RADIUS) Authorization for
Network Access Server (NAS) Management
■ RFC5904: RADIUS Attributes for IEEE 802.16 Privacy Key Management Version 1
(PKMv1) Protocol Support