Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1469)

DHCP Snooping Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 56.31
show ip dhcp snooping
Use this command to display DHCP snooping global configuration on the switch.
Syntax show ip dhcp snooping
Mode User Exec and Privileged Exec
Example To display global DHCP snooping configuration on the switch, use the command:
Related Commands service dhcp-snooping
show arp security
show ip dhcp snooping acl
show ip dhcp snooping agent-option
show ip dhcp snooping binding
show ip dhcp snooping interface
awplus# show ip dhcp snooping
Figure 56-7: Example output from the show ip dhcp snooping command
DHCP Snooping Information:
DHCP Snooping service ............. Enabled
Option 82 insertion ............... Enabled
Option 82 on untrusted ports ...... Not allowed
Binding delete by client .......... Disabled
Binding delete by link down ....... Disabled
Verify MAC address ................ Disabled
SNMP DHCP Snooping trap ........... Disabled
DHCP Snooping database:
Database location ................. nvs
Number of entries in database ..... 2
DHCP Snooping VLANs:
Total VLANs enabled ............... 1
Total VLANs disabled .............. 9
vlan1 .............. Enabled
vlan2 .............. Disabled
vlan3 .............. Disabled
vlan4 .............. Disabled
vlan5 .............. Disabled
vlan100 ............ Disabled
vlan101 ............ Disabled
vlan105 ............ Disabled
vlan1000 ........... Disabled
vlan1001 ........... Disabled