Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 108)

User Access Commands
Software Reference for x310 Series Switches
5.22 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
security-password warning
This command specifies the number of days before the password expires that the user will
receive a warning message specifying the remaining lifetime of the password.
Note that the warning period cannot be set unless the lifetime feature is enabled with the
security-password lifetime command.
The no security-password warning command disables this feature.
Syntax security-password warning <0-1000>
no security-password warning
Default The default warning period is 0, which disables warning functionality.
Mode Global Configuration
Example To configure a warning period of three days, use the command:
Validation
Commands
show running-config security-password
show security-password configuration
Related Commands security-password history
security-password forced-change
security-password lifetime
security-password minimum-categories
security-password minimum-length
security-password reject-expired-pwd
Parameter Description
<0-1000> Warning period in the range from 0 to 1000 days. A value 0 disables
the warning functionality and no warning message is displayed for
expiring passwords. This is equivalent to the no security-password
warning command. The warning period must be less than, or equal
to, the password lifetime set with the
security-password lifetime
command.
awplus# configure terminal
awplus(config)# security-password warning 3