Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1706)

Dynamic Host Configuration Protocol (DHCP) Commands
Software Reference for x310 Series Switches
64.8 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
ip dhcp bootp ignore
This command configures the DHCP server to ignore any BOOTP requests it receives. The
DHCP server accepts BOOTP requests by default.
The no variant of this command configures the DHCP server to accept BOOTP requests.
This is the default setting.
Syntax ip dhcp bootp ignore
no ip dhcp bootp ignore
Mode Global Configuration
Examples To configure the DHCP server to ignore BOOTP requests, use the commands:
To configure the DHCP server to respond to BOOTP requests, use the commands:
Related Commands show ip dhcp server summary
awplus# configure terminal
awplus(config)# ip dhcp bootp ignore
awplus# configure terminal
awplus(config)# no ip dhcp bootp ignore