Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 2064)

Ping-Polling Commands
Software Reference for x310 Series Switches
79.6 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
debug ping-poll
This command enables ping poll debugging for the specified ping-poll instance. This
generates detailed messages about ping execution.
The no variant of this command disables ping-poll debugging for the specified ping-poll.
Syntax debug ping-poll <1-100>
no debug ping-poll {<1-100>|all}
Mode Privileged Exec
Examples To enable debugging for ping-poll instance 88, use the command:
To disable all ping poll debugging, use the command:
To disable debugging for ping-poll instance 88, use the command:
Related Commands active (ping-polling)
clear ping-poll
ping-poll
show ping-poll
undebug ping-poll
Parameter Description
<1-100> A unique ping poll ID number.
all Turn off all ping-poll debugging.
awplus# debug ping-poll 88
awplus# no debug ping-poll all
awplus# no debug ping-poll 88