Auth-web-server ping-poll timeout – Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 1179

Authentication Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A
AlliedWare Plus
TM
Operating System - Version 5.4.4C
43.53
auth-web-server ping-poll timeout
This command modifies the ping poll timeout parameter for the web authentication
feature. The timeout parameter specifies the time in seconds to wait for a response to a
ping packet.
Use the no variant of this command to reset the timeout of ping polling to the default (1
second).
Syntax
auth-web-server ping-poll timeout <1-30>
no auth-web-server ping-poll timeout
Default
The default timeout for ping polling is 1 second.
Mode
Global Configuration
Examples
To set the timeout of ping polling to 2 seconds, use the command:
To set the timeout of ping polling to the default (1 second), use the command:
Validation
Commands
show auth-web-server
show running-config
Parameter
Description
<1-30>
Seconds.
awplus#
configure terminal
awplus(config)#
auth-web-server ping-poll timeout 2
awplus#
configure terminal
awplus(config)#
no auth-web-server ping-poll timeout