Auth-web-server ping-poll enable – Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 1175
Authentication Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A
AlliedWare Plus
TM
Operating System - Version 5.4.4C
43.49
auth-web-server ping-poll enable
This command enables the ping polling to the supplicant (client device) that is
authenticated by web authentication.
The no variant of this command disables the ping polling to the supplicant that is
authenticated by web authentication.
Syntax
auth-web-server ping-poll enable
no auth-web-server ping-poll enable
Default
The ping polling feature for web authentication is disabled by default.
Mode
Global Configuration
Examples
To enable the ping polling feature for web authentication, use the following commands:
To disable the ping polling feature for web authentication, use the following commands:
Validation
Commands
show auth-web-server
show running-config
awplus#
configure terminal
awplus(config)#
auth-web-server ping-poll enable
awplus#
configure terminal
awplus(config)#
no auth-web-server ping-poll enable