Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1604)

AMF Commands
Software Reference for x310 Series Switches
60.16 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
atmf log-verbose
This command limits the number of log messages displayed on the console or
permanently logged.
Syntax atmf log-verbose <1-3>
no atmf log-verbose
Default The default log display is 3.
Usage This command is intended for use in large networks where verbose output can make the
console unusable for periods of time while nodes are joining and leaving.
Mode Global Configuration
Example To set the log-verbose to noise level 2, use the command
Validation
Command show atmf
Parameter Description
atmf Manage the AMF feature
log-verbose Apply the verbose log message limitation
<1-3> The verbose limitation (3 = noisiest, 1 = quietest)
VCF-1# configure terminal
VCF-1(config)# atmf log-verbose 2