Telnet server – Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual

Page 120

Text mode
Original mode

User Access Commands

Software Reference for x310 Series Switches

5.34

AlliedWare Plus

Operating System - Version 5.4.4C

C613-50046-01 REV A

telnet server

This command enables the telnet server on the specified TCP port. If the server is already
enabled then it will be restarted on the new port. Changing the port number does not
affect the port used by existing sessions.

Syntax

telnet server {<1-65535>|default}

Mode

Global Configuration

Example

To enable the telnet server on TCP port 2323, use the following commands:

Related Commands

show telnet

Parameter

Description

<1-65535>

The TCP port to listen on.

default

Use the default TCP port number 23.

awplus#

configure terminal

awplus(config)#

telnet server 2323