Show ipv6 forwarding, Show ipv6 interface brief, Use the – Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 700: Show ipv6 interface brief command, Show ipv6 forwarding show ipv6 interface brief

IPv6 Commands
Software Reference for x310 Series Switches
27.22
AlliedWare Plus
TM
Operating System - Version 5.4.4C
C613-50046-01 REV A
show ipv6 forwarding
Use this command to display IPv6 forwarding status.
For information on output options, see
“Controlling “show” Command Output” on
Syntax
show ipv6 forwarding
Mode
User Exec and Privileged Exec
Example
Output
Figure 27-1: Example output from the show ipv6 forwarding command
show ipv6 interface brief
Use this command to display brief information about interfaces and the IPv6 address
assigned to them.
For information on output options, see
“Controlling “show” Command Output” on
Syntax
show ipv6 interface [brief]
Mode
User Exec and Privileged Exec
Examples
Output
Figure 27-2: Example output from the show ipv6 interface brief command
Related Commands
awplus#
show ipv6 forwarding
ipv6 forwarding is on
Parameter
Description
brief
Specify this optional parameter to display brief IPv6 interface
information.
awplus#
show ipv6 interface brief
awplus#show ipv6 interface brief
Interface IPv6-Address Status Protocol
lo unassigned admin up running
vlan1 2001:db8::1/48 admin up down
fe80::215:77ff:fee9:5c50/64