Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 1910
LLDP, LLDP-MED and Voice VLAN Introduction and Configuration
Software Reference for x310 Series Switches
70.6
AlliedWare Plus
TM
Operating System - Version 5.4.4C
C613-50046-01 REV A
LLDP-MED Organizationally Specific TLVs (LLDP-MED TLVs)—ANSI/TIA-1057- 2006
LLDP-MED
Capabilities
Indicates an LLDP-MED capable device, and advertises which
LLDP-MED TLVs are supported and enabled, and the device type.
For this switch, the device type is Network Connectivity Device.
An advertisement containing this TLV is an LLDP-MED
advertisement.
Network Policy
Network policy information configured on the port for connected
media endpoint devices. The switch supports Application Type 1:
Voice, including the following network policy for connected voice
devices to use for voice data:
■
Voice VLAN ID
■
Voice VLAN User Priority tagging
■
Voice VLAN Diffserv Code Point (DSCP)
Location
Identification
Location information configured for the port, in one or more of
the following formats:
■
Civic address
■
Coordinate-based LCI
■
Emergency Location Identification Number (ELIN)
For more information, see
“LLDP-MED: Location Identification
Extended
Power-via-MDI
For PoE-capable devices, this TLV includes:
■
Power Type field: Power Sourcing Entity (PSE).
■
Power Source field: current power source, either Primary
Power Source or Backup Power Source.
■
Power Priority field: power priority configured on the port.
■
Power Value field: In TLVs transmitted by Power Sourcing
Equipment (PSE) such as this switch, this advertises the power
that the port can supply over a maximum length cable based
on its current configuration (that is, it takes into account
power losses over the cable). In TLVs received from Powered
Device (PD) neighbors, the power value is the power the
neighbor requests.
Available on devices that are PoE-capable.
Inventory
Management TLV
Set
Includes the following TLVs, based on the current hardware
platform and the software version, identical on every port on the
switch:
■
Hardware Revision
■
Firmware Revision
■
Software Revision
■
Serial Number
■
Manufacturer Name
■
Model Name
■
Asset ID
On Virtual Chassis Stacking devices, the inventory information is
based on the current master.
Table 70-2: TLVs in LLDP advertisements(cont.)
TLV
Description