Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1395)

Secure Shell (SSH) Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 54.13
debug ssh server
This command enables the SSH server debugging facility. When enabled, the SSH server
sends diagnostic messages to the system log. To display the debugging messages on the
terminal, use the terminal monitor command.
The no variant of this command disables the SSH server debugging facility. This stops the
SSH server from generating diagnostic debugging messages.
Syntax debug ssh server [brief|full]
no debug ssh server
Default SSH server debugging is disabled by default.
Mode Privileged Exec and Global Configuration
Examples To start SSH server debugging, use the command:
To start SSH server debugging with extended output, use the command:
To disable SSH server debugging, use the command:
Related Commands debug ssh client
show ssh server
undebug ssh server
Parameter Description
brief Enables brief debug mode.
full Enables full debug mode.
awplus# debug ssh server
awplus# debug ssh server full
awplus# no debug ssh server