Show radius local-server statistics – Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 1360
Local RADIUS Server Commands
Software Reference for x310 Series Switches
51.32
AlliedWare Plus
TM
Operating System - Version 5.4.4C
C613-50046-01 REV A
show radius local-server statistics
Use this command to display statistics about the local RADIUS server.
For information on output options, see
“Controlling “show” Command Output” on
Syntax
show radius local-server statistics
Mode
User Exec and Privileged Exec
Usage
Both unknown usernames and invalid passwords will display as failed logins in the show
output.
Example
The following command displays Local RADIUS server statistics.
Output
Related Commands
clear radius local-server statistics
radius-server local
awplus#
show radius local-server statistics
Figure 51-7: Example output from the show radius local-server statistics command
Server status : Run (administrative status is enable)
Enabled methods: MAC EAP-MD5 EAP-TLS EAP-PEAP
Successes
:1
Unknown NAS
:0
Failed Logins
:0
Invalid packet from NAS
:0
Internal Error
:0
Unknown Error
:0
NAS : 127.0.0.1
Successes
:0
Shared key mismatch
:0
Failed Logins
:0
Unknown RADIUS message
:0
Unknown EAP message
:0
Unknown EAP auth type
:0
Corrupted packet
:0
NAS : 192.168.1.61
Successes
:0
Shared key mismatch
:0
Failed Logins
:0
Unknown RADIUS message
:0
Unknown EAP message
:0
Unknown EAP auth type
:0
Corrupted packet
:0
NAS : 192.168.1.63
Successes
:1
Shared key mismatch
:0
Failed Logins
:0
Unknown RADIUS message
:0
Unknown EAP message
:0
Unknown EAP auth type
:0
Corrupted packet
:0
NAS : 192.168.1.65
Successes
:0
Shared key mismatch
:0
Failed Logins
:0
Unknown RADIUS message
:0
Unknown EAP message
:0
Unknown EAP auth type
:0
Corrupted packet
:0
Username
Successes Failures
a
1
0
admin
0
0