Ipv6 route – Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 698

IPv6 Commands
Software Reference for x310 Series Switches
27.20
AlliedWare Plus
TM
Operating System - Version 5.4.4C
C613-50046-01 REV A
ipv6 route
Use this command to establish the distance for static routes of a network prefix.
Use the no variant of this command to disable the distance for static routes of the network
prefix.
Syntax
ipv6 route <dest-prefix> <dest-prefix/length>
{<gateway-ip>|<gateway-name>} [<distvalue>]
no ipv6 route <dest-prefix> <dest-prefix/length>
{<gateway-ip>|<gateway-name>} [<distvalue>]
Mode
Global Configuration
Example
Validation
Commands
show running-config
show ipv6 route
Parameter
Description
<dest-prefix/
length>
Specifies the IP destination prefix.
The IPv6 address prefix uses the format X:X::/prefix-length.
The prefix-length is usually set between 0 and 64.
<gateway-ip>
Specifies the IP gateway (or next hop) address. The IPv6
address uses the format X:X::X:X/Prefix-Length. The prefix-
length is usually set between 0 and 64.
<distvalue>
Specifies the administrative distance for the route. Valid
values are from 1 to 255.
<gateway-name>
Specifies the name of the gateway (or next hop) interface.
awplus#
configure terminal
awplus(config)#
ipv6 route 2001:0db8::1/128 myintname 32