Trigger activate – Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 2040
Trigger Commands
Software Reference for x310 Series Switches
77.20
AlliedWare Plus
TM
Operating System - Version 5.4.4C
C613-50046-01 REV A
trigger activate
This command is used to manually activate a specified trigger from the Privileged Exec
mode, which has been configured with the trigger command from the Global
Configuration mode.
Syntax
trigger activate <1-250>
Mode
Privileged Exec
Usage
This command manually activates a trigger without the normal trigger conditions being
met.
The trigger is activated even if it is configured as inactive. The scripts associated with the
trigger will be executed even if the trigger is in the diagnostic test mode.
Triggers activated manually do not have their repeat counts decremented or their 'last
triggered' time updated, and do not result in updates to the '[type] triggers today'
counters.
Example
To manually activate trigger 12 use the command:
Related Commands
Parameter
Description
<1-250>
A trigger ID.
awplus#
trigger activate 12