Show dot1x supplicant – Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 1092

802.1X Commands
Software Reference for x310 Series Switches
41.26
AlliedWare Plus
TM
Operating System - Version 5.4.4C
C613-50046-01 REV A
show dot1x supplicant
This command shows the supplicant state of the authentication mode set for the switch.
This command shows a summary when the optional brief parameter is used.
For information on output options, see
“Controlling “show” Command Output” on
Syntax
show dot1x supplicant [<macadd>] [brief]
Mode
Privileged Exec
Example
See sample output below showing the 802.1X authenticated supplicant on the switch:
Parameter
Description
<macadd>
MAC (hardware) address of the Supplicant.
brief
Brief summary of the Supplicant state.
awplus#
show dot1x supplicant
authenticationMethod: dot1x
totalSupplicantNum: 1
authorizedSupplicantNum: 1
macBasedAuthenticationSupplicantNum: 0
dot1xAuthenticationSupplicantNum: 1
webBasedAuthenticationSupplicantNum: 0
Supplicant name: manager
Supplicant address: 00d0.59ab.7037
authenticationMethod: dot1x
Two-Step Authentication:
firstAuthentication: Pass - Method: mac
secondAuthentication: Pass - Method: dot1x
portStatus: Authorized - currentId: 4
abort:F fail:F start:F timeout:F success:T
PAE: state: Authenticated - portMode: Auto
PAE: reAuthCount: 0 - rxRespId: 0
PAE: quietPeriod: 60 - maxReauthReq: 2 - txPeriod: 30
BE: state: Idle - reqCount: 0 - idFromServer: 3
BE: suppTimeout: 30 - serverTimeout: 30
CD: adminControlledDirections: in - operControlledDirections: in
CD: bridgeDetected: false
KR: rxKey: false
KT: keyAvailable: false - keyTxEnabled: false